2022 Komatsu Mid-size Excavators PC138USLC-11
Stability and power for tight spacesBuilt for working in tight spaces like roadways, bridges or urban areas, this tight tail swing radius excavator is designed for exceptional stability, with responsive quick arm speed and a purpose-built cab for operator comfort.
Features may include:
- Quick and powerful
- Impressive fuel efficiency
- Spacious and comfortable
- Designed for exceptional stability
- Get greater clearance when space is limited with a higher boom raise angle than our standard excavator that reduces the minimum front implement swing radius.
- Get more done in confined areas with the short tail swing radius that allows the machine to work in more spaces than our conventional excavator.
- High maneuverability is achieved through the purpose-built cabs that swings within the same radius as the counterweight. The sliding cab door allows operators to easily enter and exit when space is limited.
- The compact counterweights provide exceptional lifting capability and stability providing a comfortable, confident operating experience.
- Help improve efficiency with the quick return valve that directs additional oil through a second line directly back to the tank when the arm is extended, helping to reduce back pressure and fuel consumption.
- 2022
- Komatsu
- Mid-size Excavators
- PC138USLC-11
- Medium
- Model: SAA4D95LE-7
- Komatsu
- Water-cooled, 4-cycle, direct injection
- Variable flow, turbocharged, air-to-air aftercooled
- 4
- Hydraulic cylinders/Number of cylinders: (Boom / 2: 4.1 in | Arm / 1: 4.3 in | Bucket / 1: 3.7 in)
- Hydraulic cylinders/Number of cylinders: (Boom / 2: 41.5 in | Arm / 1: 46.3 in | Bucket / 1: 34.8 in)
- 199 in³
- SAE J1995 / Gross: 97.3 HP | ISO 9249 / SAE J1349 / Net: 97.2 HP | Fan at maximum speed /Net: 90.9 HP
- Rated: 2,050 rpm
- Fan drive method for radiator cooling: Mechanical with viscous clutch
- Hydraulic motors Travel: 2 x piston motor with parking brake | Hydraulic motors Swing: 1 x piston motor with swing holding brake
- All-speed control, electronic
- control: Two levers with pedals
- method: Fully hydrostatic | Swing Driven by: Hydraulic motor
- Hydraulic lock
- Wet, multiple-disc
- Maximum drawbar pull: 27,560 lbf. | Gradeability: 70%, 35° | Swing torque: 21,627 ft.-lbs.
- Maximum travel speed: High: 3.2 mph / Low: 1.8 mph | Swing: 11.0 rpm
- Triple-Grouser 20 in: 6.57 psi | Triple-Grouser 24 in: 5.49 psi | Triple-Grouser 28 in: 4.77 psi
- Exterior – ISO 6395: 101 dB(A) | Operator – ISO 6396: 71 dB(A)
- HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve | Number of selectable working modes: 6
- Main pump: Type: Variable capacity piston type / Pumps for: Boom, arm, bucket, swing, and travel circuits
- Maximum flow: 64 US gpm | Maximum Auxiliary Flow at 3,553 psi: 64 US gpm
- Implement circuits: 5,050 psi | Travel circuit: 5,050 psi | Swing circuits: 4,240 psi | Pilot circuit: 470 psi
- Center frame: X-leg frame | Track frame: Box-section
- Hydraulic cylinders/Number of cylinders rod diameter: (Boom / 2: 2.76 in | Arm / 1: 2.95 in | Bucket / 1: 2.56 in)
- tank: 52.8 US gal | Engine: 3.0 US gal | Final drive, each side: 0.55 US gal | Swing drive: 0.7 US gal | DEF tank: 3.3 US gal
- 4.6 US gal
- tank: 18.2 US gal
- Triple-Grouser 20 in: 34,563 lbs. | Triple-Grouser 24 in: 35,673 lbs. | Triple-Grouser 28 in: 35,114 lbs.
- Swing reduction: Planetary gear | Swing circle lubrication: Grease-bathed | Swing lock: Wet, multiple-disc brake | Track type: Sealed track | Track adjuster: Hydraulic | Number of shoes: 46 each side | Number of carrier rollers: 2 each side | Number of track rollers: 8 each side
- 60128
- Richland MS
- Pre-Owned
- C050736
- 2022
- Komatsu
- Mid-size Excavators PC138USLC-11
- Model: SAA4D95LE-7
- Available
- 60128