Engine
Engine Torque, Maximum
Up to 25,000 ft.-lbs.
Air Filter
Dual Donaldson 2-stage, dry type (Gardner Denver) Three Donaldson 2-stage, dry type (Sullair)
Cylinder Liners
Cylinders Four (4) 10 in diameter
Stroke
66 in
Motor
Motor Power
Requires: 1,000 HP main motor | Main drive motor Standard: 700 HP
Electric
Electrical
Design: DC electric motor driven chainless rack and pinion design | Incoming power Supply voltage 60 Hz: 4,160 V/7, 200 3-phase 50 Hz: 6,600 V or 7,200 V 3-phase | Recommended supply transformer: Minimum 1.5MVA continuous, 6MVA minimum short circuit at drill | High voltage switchgear: External disconnect at trail cable junction box, high voltage load break disconnect and high voltage vacuum contactor for main drive motor and drives
Hydraulics
Hydraulic Type
Main system: Closed loop design utilizing dual variable-displacement piston pumps for propel | Auxiliary system: Open loop design utilizing vane pumps for mast raising, machine leveling, and pipe handling | Control valves: Manifold mounted electro-hydraulic, PLC controlled - Discrete 24VDC Solenoid | lines: Extensive use of high pressure steel tubing | Filtration: 3-micron return filters, 5-micron high pressure filters, 3-micron charge filters, magnetic suction strainers
Operational
Operating Conditions
Maximum grade: 20% | Available volumes Standard: 3,450 CFM
Operating Speed
Rotation speed: 0-119 rpm | Propel speed (maximum) High (60 Hz): 1.0 mph High (50 Hz): .8 mph Low (60 Hz): .6 mph Low (50 Hz): .5 mph
Maximum Pressure
Operating: 65 psi
Ground Pressure
129 psi | Ground bearing pressure for track pads 36 in shoes: 29.0 psi 44 in shoes: 22.6 psi
Performance
Noise Level
<80 dB
Dimensions
Depth, Maximum
Maximum single pass hole Standard: 65 ft. | Maximum multi-pass hole: Single pipe rack: 130 ft. Dual pipe rack: 195 ft.
Width
Shoe Standard: 36 in
Dimensions
Hole diameter: 10 5/8 - 17 1/2 in | Mast: Standard: 65 ft. | Raising and lowering Two hydraulic cylinders standard diameter: 10.5 in | Drill feed: Up to 16 ft./min | Hoist: Up to 105 ft./min | Pipe size Diameter: 9.25 - 13.625 in | Jack pads: 30 in
Capacities
Load Capacity, Land
Maximum bit: 150,000 lbs. | Bit (maximum): 150,000 lbs.
Features
Auxiliary winch Capacity: 14,000 lbs.
Weights
Weight, In Running Order
400,000 lbs.
Weight, As Shipped
339,400 lbs.
Features
Construction Material
Lattice type using alloy steel structural shapes
Features
Type: Parallelogram style pipe rack, one rack is standard | Auxiliary equipment: Standard deck wrench | Crawler type: Heavy-duty lug and tumbler drive system, Komatsu design | Propel machinery: Dual hydrostatic planetary drive with sprint set, hydraulic release break, 310 HP | Compressor: Gardner-Denver SSY Series oil-flood screw type